Packet Captures

Sort by new | name | popular

Viewing 121 - 126 of 126

Auto-RP.cap (726 bytes)

Packets: 9 Duration: 239s Downloads: 3191

Routers 2 and 3 have been configured as candidate RPs, and multicast RP announcements to 239.0.1.39. Router 1 is the RP. R1 sees the candidate RP announcements from R2 and R3, and designates R3 the RP because it has a higher IP address (3.3.3.3). R1 multicasts the RP mapping to 224.0.1.40. The capture is from the R1-R2 link.

802.1X.cap (498 bytes)

Packets: 7 Duration: 19s Downloads: 4937

A wired client authenticates to its switch using 802.1x/EAP and MD5 challenge authentication.

802.1w_rapid_STP.cap (2.3 KB)

Packets: 30 Duration: 56s Downloads: 4847

Rapid Spanning Tree Protocol BPDUs are received from a Catalyst switch after connecting to a port not configured for PortFast. The port transitions through the blocking and learning states before issuing a topology change notification (packet #30) and transitioning to the forwarding state.

802.1D_spanning_tree.cap (1.1 KB)

Packets: 14 Duration: 26s Downloads: 5670

IEEE 802.1D Spanning Tree Protocol (STP) advertisements sent every two seconds.

3725_CDP.cap (390 bytes)

Packets: 1 Duration: n/a Downloads: 3182

Cisco Discovery Protocol (CDP) from FastEthernet0/0 of a Cisco 3725 router.

3560_CDP.cap (1.2 KB)

Packets: 3 Duration: 120s Downloads: 3595

Cisco Discovery Protocol (CDP) advertisements from a Catalyst 3560. Note how much information is offered to a potential attacker.

Viewing 121 - 126 of 126