Packet Captures
Viewing 1 - 10 of 10
- 1
icmp with record route option set.cap (1.2 KB)
| Packets: 10 | Duration: 2s | Downloads: 3349 |
ping packet with record route option set and IP addresses of all outgoing and incoming interfaces along the path.
In that we can also see position of current pointer.
traceroute_MPLS.cap (3.3 KB)
| Packets: 29 | Duration: 3s | Downloads: 7927 |
PPP_negotiation.cap (4.6 KB)
| Packets: 63 | Duration: 67s | Downloads: 5707 |
path_MTU_discovery.cap (6.2 KB)
| Packets: 8 | Duration: n/a | Downloads: 4598 |
Tracepath is used to determine the MTU of the path between hosts 192.168.0.2 and .1.2. Packet #6 contains an ICMP "fragmentation needed" message, indicating the MTU for that hop is 1400 bytes.
MPLS_encapsulation.cap (1.3 KB)
| Packets: 10 | Duration: n/a | Downloads: 4787 |
Capture taken from the PE1-P1 link. ICMP traffic between CE1 and CE2 is encapsulated outbound with MPLS label 18. Note that returning traffic is not labeled, due to penultimate hop popping (PHP).
IP_in_IP.cap (1.5 KB)
| Packets: 10 | Duration: n/a | Downloads: 5346 |
Direct IP-in-IP tunnel encapsulation (configured in Cisco IOS with tunnel mode ipip).
ICMP_across_frame_relay.cap (1.2 KB)
| Packets: 10 | Duration: n/a | Downloads: 3319 |
A Cisco 3725 pinging its neighbor across a point-to-point frame relay connection.
- Categories: None
- Protocols: Frame Relay, ICMP, IP
ICMP_across_dot1q.cap (1.7 KB)
| Packets: 15 | Duration: 35s | Downloads: 5046 |
A ping issued from 192.168.123.2 to 192.168.123.1 is encapsulated with an IEEE 802.1Q header, placing it in VLAN 123.
Viewing 1 - 10 of 10
- 1