My reservation is Jan 1st, 00:00 UTC for 2 hours, but I couldn't log into any devices at all. Please look into this issue. BTW, I used the lab successfully before. This is NOT my first time use and I don't think any settings wrong on my side.

Thanks.

There was an issue with the Opengear console server earlier. A process responsible for shell allocation hung and had to be hard killed. I rebooted the console server just to be safe.

I'm not sure what caused it or how repeatable it is. Only time will tell...

My reservation is Mar 1st, 16:00 UTC for 6 hours, but I couldn't log into any devices at all.

" telnet 70.174.182.38 2014 Trying 70.174.182.38... Connected to ip70-174-182-38.dc.dc.cox.net (70.174.182.38). Escape character is '^]'. login: blockb Password: Connection closed by foreign host. "

Could you help me?

The issue I explained above has not recurred since upgrading the console server's firmware.

Please note that if you're unable to access the lab, you'll need to provide more information than "it doesn't work" if you expect any support.

I didn't planned having some support, just wanted to point that the problem happened again.

But I found some interesting behaviours, in the meantime:

1- I couldn't access my reservation in the site. Opening http://packetlife.net/lab/reservation/1935/ (the link I got in the confirmation) just got me a "page not found" error.

(Let me say that I know that people have the right to sleep, and I think that this is a very important thing to do at night. :) So, when I saw the error was happening, I just thought: "They're sleeping, and they deserve it". No joke, no sarcasm here. :) )

2- After 30 minutes, my reservation expired and got deleted, as I expected. So I tried to re-schedule for the rest of the 4 hour period but... there was only 3 hours free o_O.

Well, someone just was faster than me. But, why didn't he/she scheduled the 4 hours? That must have coincidence, but... never mind that. ;)

If it happen again (and I hope it doesn't) I'll gather all relevant information.

Hello I have my reservation now, and I also can't log in. I used the lab before about five times without some problem.

After a try to connect to lab devices a get the error:

"Network error: Connection timed out"

I'm using putty connection manager. I don't know where the problem is :-(

My reservation was sheduled today from 18:00 UTC for three hours (Block A)

Thanks

Marek

Sorry, now I see that there is a power outage => that explaints why I can't log in :-)

Marek

Hey guys im new to packetlife.net but unable to login getting below error. pls. Help?

This lab equipment is provided free of charge through reservation at:

http://packetlife.net/lab/

If you were provided access through a third party or if you were charged
for access, please contact the administrator at stretch@packetlife.net.

A quick review of basic lab rules:

• DO NOT attempt to erase/format Flash on any device.
• DO NOT set login usernames or passwords other than 'cisco'.
• DO remember to erase your configurations at the end of your reservation ('write erase' or 'erase start').

Complete rules: http://packetlife.net/wiki/community-lab-user-agreement/

You are connected to port 1 as blockc.

[Hit enter to continue]

Connection to host lost.

Have you tried contacting Stretch directly?:

http://packetlife.net/contact/