hello,

i'm about to comission a 2960-24TC-L populated with two SFP's.

i'd like to ensure that the combo copper port on the switch is never able to be used.

i've labbed it up, when the SFP port is up, the copper port won't come up. but if the fibre/SFP is pulled, the copper port is able to be used..

i just want to avoid any tomfoolery as the switch is going to be installed in a shared comms room/rack.

cheers

and 2 minutes after i make this post i find the command.

garh.

Switch(config)#int gi0/1
Switch(config-if)#me
Switch(config-if)#media-type ?
  auto-select  Use whichever connector is attached
  rj45         Use RJ45 connector
  sfp          Use SFP connector

.. flame away.