How do I send the break signal?

switchmaster 5 posts	8 Feb 2010 at 5:27 p.m. UTC well i read the faqs n i tried ~b through telnet on a switch whr sum bozo has put the enable password and even saved the freekin config so even after restarting the switch i cant log in ... can anyone help me with this???
scarface 23 posts	8 Feb 2010 at 7:44 p.m. UTC So you want to do a password recovery? It is pretty easy. http://www.ciscosystems.ch/en/US/products/hw/switches/ps628/products_password_recovery09186a0080094184.shtml Do not forget to type the flash_init command.
ianmprice 31 posts	8 Feb 2010 at 8:03 p.m. UTC did you try cisco for the password?
stretch 274 posts	9 Feb 2010 at 1:20 a.m. UTC I haven't come up with a solution to enable the password recovery mechanism that requires interaction with the mode button (seriously, Cisco?). I just fixed S3, until the next time.
switchmaster 5 posts	9 Feb 2010 at 6:10 a.m. UTC thanx u guys for all the help.. so this means u cant reset a switch password without actually being there physically, thats not gud in situations like these ... stretch cant u disable the enable passwords on just the switches like u did for the copy commands??? if u have to manually do this every time i think its better to leave them on just for the routers .. if anyone wants to practice them they can do it on routers.

Viewing 1 - 5 of 5