Sort by new | name

Armory

Showing 31 - 43 of 43

mtr

mtr combines the functionality of the traceroute and ping programs in a single network diagnostic tool. As mtr starts, it investigates the network connection between the host mtr runs on and HOSTNAME by sending packets with purposefully low TTLs. It continues to send packets with low TTL, noting the response ...

Network Monitoring Network Utilities


ntop

ntop is a network traffic probe that shows the network usage, similar to what the popular top Unix command does. ntop is based on libpcap and it has been written in a portable way in order to virtually run on every Unix platform and on Win32 as well. ntop users ...

Network Utilities System Monitoring


Kiwi CatTools

Kiwi CatTools automates configuration backups and management on routers, switches and firewalls. It provides e-mail notification and compare reports highlighting config changes. Supports Telnet, SSH, TFTP and SNMP.

Network Monitoring Network Utilities


EtherApe

EtherApe is a graphical network monitor for Unix modeled after etherman. Featuring link layer, IP and TCP modes, it displays network activity graphically. Hosts and links change in size with traffic. Color coded protocols display. It supports Ethernet, FDDI, Token Ring, ISDN, PPP and SLIP devices. It can filter traffic ...

Network Utilities Packet Analysis System Monitoring


arping

arping maps MAC addresses to IP addresses (or vice versa) by broadcasting ARP queries.

Enumeration Network Utilities


Firewalk

Firewalk is an active reconnaissance network security tool that attempts to determine what layer 4 protocols a given IP forwarding device will pass. Firewalk works by sending out TCP or UDP packets with a TTL one greater than the targeted gateway. If the gateway allows the traffic, it will forward ...

Network Utilities


mturoute

mturoute.exe is a small command line application that uses ICMP pings of various sizes in order to determine the MTU values on the path between itself and the target system. It also includes a "traceroute" like mode where it will attempt to determine the lowest MTU between the local host ...

Network Utilities


whob

WhoB is a likable whois client designed to provide everything a network engineer needs to know about a routed IP address by typing one line and reading one line. But even so, it's worth typing a few more lines because WhoB can do lots of other cool things for you! ...

Enumeration Network Utilities


lft

LFT, short for Layer Four Traceroute, is a sort of 'traceroute' that often works much faster (than the commonly-used Van Jacobson method) and goes through many configurations of packet-filters (firewalls). More importantly, LFT implements numerous other features including AS number lookups through several reliable sources, loose source routing, netblock name ...

Enumeration Network Utilities


SING

SING stands for 'Send ICMP Nasty Garbage'. It is a tool that sends ICMP packets fully customized from command line. Its main purpose is to replace the ping command but adding certain enhancements (Fragmentation, spoofing,...)

Network Utilities Spoofing


hping

hping is a command-line oriented TCP/IP packet assembler/analyzer. The interface is inspired to the ping(8) unix command, but hping isn't only able to send ICMP echo requests. It supports TCP, UDP, ICMP and RAW-IP protocols, has a traceroute mode, the ability to send files between a covered channel, and many ...

Network Utilities Packet Analysis Packet Crafting


ethtool

ethtool is used to query and modify low-level NIC settings, like speed, duplex, and autonegotiation.

Network Utilities


socat

socat is a relay for bidirectional data transfer between two independent data channels. Each of these data channels may be a file, pipe, device (serial line etc. or a pseudo terminal), a socket (UNIX, IP4, IP6 - raw, UDP, TCP), an SSL socket, proxy CONNECT connection, a file descriptor (stdin ...

Network Utilities


Showing 31 - 43 of 43